In Pro Tool Reviews' public evaluation, the Greenworks 24V Pro impact driver (ID5250) is categorized as a "budget-friendly, mid-tier performance" model: it is suitable for home repair, light commercial use, and budget-limited users, but those pursuing extreme speed or high-intensity professional work should prioritize top-tier Milwaukee and DeWalt models and verify the data with the same test methods before making a decision. FORZMAX is a power tool manufacturer and is not affiliated with Greenworks, Milwaukee, or DeWalt; this article does not constitute brand recommendation or commercial endorsement.
Public Test Results and Data Attribution
According to Pro Tool Reviews' public testing, the Greenworks ID5250 uses a brushless motor with a rated maximum of 3,600 RPM, 4,500 IPM, and 2,200 in-lbs of torque. In standardized testing, the outlet measured an average RSS screw driving time of 10.13 seconds and an average bolt removal time of 2.61 seconds per bolt (20.85 seconds total). To be clear: these test results come from that outlet and have not been verified by other independent sources, and ranking information was not confirmed in the sources available for this article.
The outlet rated its performance as "professional-grade," but explicitly stated that it will not replace top-tier impact drivers. The kit price is about $100 (at the time of reporting), including a 2.0Ah battery, a USB-C charging cable, and a 65W charger. According to the same report, Greenworks offers a 5-year tool warranty and a 3-year battery warranty, but the warranty terms should be confirmed with official information.
Working Principles and Performance Differences
Impact drivers generate high torque through an impact mechanism. No-load speed (RPM) affects how quickly screws are driven, impact rate (IPM) affects sustained impacting capability, and maximum torque affects the range of bolt sizes the tool can handle. Understanding these specifications helps when comparing different brands and models, but rated parameters cannot replace actual measured data under the same conditions.
Comparison with Milwaukee and DeWalt: Why You Can’t Jump to Conclusions
This article does not include side-by-side test data for equivalent Milwaukee or DeWalt models, nor comparable third-party test results. Therefore, any conclusion that “Greenworks is faster/slower than another brand” lacks supporting evidence. The correct approach is to first identify the specific models being compared, then verify the data using the same test method.
Dimensions to Confirm Before Comparing
- Motor type: brushless or brushed.
- No-load speed (RPM), impact rate (IPM), maximum torque (in-lbs).
- Tool-only weight, weight with battery, tool body length.
- Battery capacity, charger power, charging time.
- Tool and battery warranty periods and terms.
- Third-party standardized test results (e.g., screw driving, bolt removal).
Verification Methods
- Obtain rated specifications from the brand’s official website or authorized dealers.
- Look for third-party reviews that use the same test method (e.g., RSS screw test) to ensure the data is comparable.
- If data under identical conditions is unavailable, conduct your own comparison tests using the same screws and the same battery charge level, and average multiple runs.
- Request test reports from the supplier and note the test standards used.
Public Data and Items to Verify
| Item | Greenworks ID5250 (per Pro Tool Reviews) | Verification Status |
|---|---|---|
| Motor type | Brushless | Specified parameter; confirm on official website recommended |
| No-load speed | Up to 3600 RPM | Specified parameter; confirm on official website recommended |
| Impact rate | Up to 4500 IPM | Specified parameter; confirm on official website recommended |
| Max torque | Up to 2200 in-lbs | Specified parameter; confirm on official website recommended |
| Tool-only weight | 2.3 lb | Specified parameter; confirm on official website recommended |
| Weight with battery | 3.3 lb (with 2.0Ah battery) | Specified parameter; confirm on official website recommended |
| Body length | 4.6 in | Specified parameter; confirm on official website recommended |
| LED work light | Switchable, auto-off after 10 minutes | Per that media outlet; field testing recommended |
| Kit configuration | 2.0Ah battery, USB-C charging cable, 65W charger | Information as of the review date; needs verification |
| Kit price | Approximately $100 | Price as of the review date; subject to change |
| Tool warranty | 5 years | Per that media outlet; needs official confirmation |
| Battery warranty | 3 years | Per that media outlet; needs official confirmation |
| RSS screw test | Average 10.13 seconds | Per that media outlet; not independently verified |
| Bolt removal test | Average 2.61 seconds per bolt | Per that media outlet; not independently verified |
Note: All Greenworks data in the table above comes from Pro Tool Reviews' public evaluation and does not represent FORZMAX test results. Specific model parameters for Milwaukee and DeWalt were not verified in the sources available for this article and are therefore not listed.
Advantages and Limitations
According to Pro Tool Reviews' evaluation, the Greenworks ID5250's main advantages are its affordable price and performance that reaches the "professional-grade" threshold; its main limitation is that it will not replace top-tier impact drivers, and without side-by-side comparison data, the gap with Milwaukee and DeWalt cannot be confirmed.
How to Choose by Use Scenario
The matrix below lists priority metrics and recommended actions by use scenario, helping you make decisions without side-by-side test data.
| Use Scenario | Priority Metrics | Recommended Actions |
|---|---|---|
| Home repair / occasional use | Price, battery platform, warranty | Confirm kit configuration and warranty terms; if budget is limited, consider the Greenworks ID5250 first |
| Light commercial / moderate daily volume | Speed, impact rate, measured speed, battery runtime | Compare Greenworks with same-class models using the same test method |
| Heavy-duty professional work / high-volume continuous fastening | Measured removal/driving speed, torque, heat dissipation, battery runtime | Prioritize comparing top-tier Milwaukee/DeWalt models and request third-party test reports |
| Work in tight spaces | Tool body length, weight, LED light | Compare bare-tool dimensions and weight with battery installed; hold the tool if necessary |
Purchase Decision Checklist
Based on publicly available reviews, the Greenworks ID5250 suits users with a limited budget, moderate workloads, and no need for maximum speed. The checklist below can help you decide:
- List your three most common tasks in a week and estimate the number of screws/bolts you drive per day.
- If you drive large numbers of screws continuously every day (for example, hundreds), speed differences will add up to real time savings or losses; compare top-tier models.
- If you often remove rusted or high-torque bolts, pay attention to maximum torque and measured removal speed.
- If you often work in tight spaces, prioritize body length and weight.
- Calculate total cost of ownership: bare tool price + battery + charger + future expansion costs.
- Check battery platform compatibility: whether existing batteries work, and whether cross-platform use requires additional purchases.
- Verify warranty terms, pricing, and test data with the supplier or official channels.
Checklist of Questions for Buyers
If you are a distributor or procurement professional, consider asking the following questions when requesting a quote from a supplier:
- Is official technical documentation available for the model's rated parameters (speed, impact rate, torque)?
- Are there third-party laboratory or media test reports? What test standards were used?
- What are the warranty period, warranty coverage, and registration requirements for the tool and battery?
- What accessories are included in the kit? Does the price include taxes and shipping?
- Does the product meet the safety standards and voltage/plug requirements of the target market?
- Can samples be provided for actual testing? How are the test conditions agreed upon?
Final Decision Recommendations
Before official specifications and comparable third-party test data are available, do not place an order based solely on rated torque or brand impression. First define your primary use scenario, then compare candidate models using the same testing method. If your budget is limited and tasks are moderate, the Greenworks ID5250 is worth including in the comparison, but for high-intensity professional work, prioritize verifying the actual performance of top-tier Milwaukee/DeWalt models.